Black Hawk Labs 6U + 4U MiniRaQ Secure Guide d'installation télécharger pdf (Page 14)



14

‐‐‐‐‐‐‐‐‐90‐091Rev.1Mi niRaQ4GSecureSeries∙InstallationGuide



Side Panel Installation

After ensuring the backplate has been properly and completely fastened to the wall, install the side

panels by inserting the side panel hooks into the rectangular cutouts in the backplate. The smooth

surface of the side panels are to face away from each other. All hooks must be engaged for proper

assembly; apply downward pressure as required to seat panels fully.

When the side panels are fully seated, the top surface will be flush with the internal 2U flanges in the

backplate and the bottom of the side panels will be flush with the bottom of the backplate. Two holes for

each side panel will align. Use four (4) of the supplied #12-24 screws for the two holes in each of

the left and right side panels. Ensure screws are installed before continuing installation.

Vent Tray Installation

Slide vent tray into the lower channel of the side

panels. The right angle flanges of the vent tray should

be oriented upward, toward the interior of the

cabinet. Temporarily install front panel (see

“Equipment Installation” on next page).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Black Hawk Labs 6U + 4U MiniRaQ Secure Guide d'installation Page 14